Dark Black tinted film, 75 x 300 cm. TRANSPARENCY: 15% FILM INSTALLATION INSTRUCTIONS: 1. Clean and degrease the glass. 2. Cut the tint film properly so that it is slightly larger than the glass. 3. To facilitate the separation of the transparent protective film, stick double-sided tape on both sides of one end of the tinted film. 4. Wet the tinted film on both sides using the atomizer 5. Spread the tinted film on the prepared surface with the adhesive side inside. 6. Using a soft material, spread tint film, wiping from center to edges. 7. If there are any remaining air bubbles on the surface, pierce them with a needle, eg 8. Cut off the excess tint film. ATTENTION! The film must be stuck to the inside of the window. PRODUCT ADVANTAGES The tinted film ensures discretion, safety and reduces the heating of the vehicle cabin by up to 60%. ATTENTION! It is not recommended to use the tinted film on the windscreen, on the front side windows and on the rear windows heated by electrical circuits.